Comments for Wood and Deck Staining at http://www.opwdecks.com , comment 1 to 674 out of 20 comments http://www.opwdecks.com Wed, 16 May 2012 19:08:04 +0100 FeedCreator 1.7.3 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2906 First you would need to remove all of the previous coatings with a[url=wooddeckstrippers.htm] deck stain stripper[/url] followed by a [url=wooddeckbrighteners.htm]wood brightener[/url]. Then you would use a penetrating stain for best performance. Since this is an older deck, I would use an oil based. TWP 1500 Series would be a good choice. - TheSealerStore Tue, 15 May 2012 07:37:33 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2900 I'm so confused about stains, I live in West Palm Florida, a have a 14 year old deck that has been stained many times since we built it. Used products like thompson and Behr. Would like to use a better product, dont know what is best oil base or water, and how long do you guys take to ship product. HELP!!!!l - luz Mon, 14 May 2012 12:33:59 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2892 Being that it is rougher wood, you probably do not need to do any prepping. If it is a smooth wood then you would need to clean and brighten the wood. - TheSealerStore Sat, 12 May 2012 12:39:15 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2891 I just built a backyard shed using plywood siding. I want to stain it with A-C stain to make the deck. Do I need to prep it at all or just stain? Yhanks - cp3984 Sat, 12 May 2012 07:38:12 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2879 Tony, what state do you live in? - TheSealerStore Thu, 10 May 2012 10:02:00 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2874 Hello, I'm tearing out and replacing my covered porch flooring (Southern exposure). I'm planning on replacing with untreated Southern Yellow Pine T&G. I'd like to dip each piece in a sealing/staining bath prior to installing to ensure complete coverage. What do you suggest? thanks so much. Tony - Tony Brazil Thu, 10 May 2012 01:28:50 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2871 1. I doubt the Cabot would hold up as well. 2. No you cannot add a semi-solid over a solid stain. 3. I would choose step 3. - TheSealerStore Wed, 09 May 2012 12:57:53 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2868 I promise this will be the last time: I would really like to try either the Armstrong Clark semi-solid or the TWP1500 semi-transparent because of the excellent reviews. My concern now is matching the deck color to the color of the house. My options are: 1)Just continue using the Cabot in a semi-transparent in the same color as the solid stain of the house (Bark). *** But will the Cabot hold up up as well as these other stains??? 2) If I use the Armstrong Clark semi-solid in one of the dark browns and re-stain the house with it also since it needs to be done anyway. ***But can I use a semi-solid over a solid stain? And will a semi-solid on the deck hold up as well as semi-transparent and be easy maintenance? 3) Use one of the TWP or Armstrong semi-transparents and hope for the best as far as color matching? - Diane Wed, 09 May 2012 06:53:49 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2865 Yes they are both oil-based. Defy makes an excellent stain as well with the Extreme being the best of the Defy stains. I do not mention as I thought you were looking for a darker brown color. You can do a two-toned deck with the railings darker and the flooring lighter. The Armstrong can be cleaned and re-coated as needed. - TheSealerStore Tue, 08 May 2012 09:55:35 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2864 I would look at the [url=defy-marine-seal.htm]Defy Marine Seal[/url] for the dock over water. - TheSealerStore Tue, 08 May 2012 09:39:03 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2859 Thank you for your response yesterday. I have a couple more questions. You recommended the TWP1500 or Armstrong Clark - both oil-based? I thought oil- based stains attracted mold/mildew. Do you not recommend the DEFY Epoxy? As mentioned previously, my deck is upper and lower across the front of my house (facing west). The lower deck is where I have the problem with mold/mildew/green stuff, and it does not get as much sun because of the upper deck over it. I have read enough of the questions/comments on this site to know that I value your advice. My house is stained in Cabot solid stain (Bark) If it were your house, would you stain the deck in a close matching semi-transparent (possibly the TWP1500 Dark Oak or Black Walnut? Or would you go slightly lighter? Is that why you did not recommend the DEFY, because the colors are light? Would it be strange to do the railings and verticals the same as the house and do the flooring in a semi-transparent? What would the maintenace be with the Armstrong Clark semi-solid? I would like to be able to clean, brighten, and recoat as necessary in the future - not strip. I appreciate any help you can give me. - Diane Tue, 08 May 2012 05:05:08 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2858 Do you know and would recommand any stain/wood preservative the can be applied on a wood dock over water? - Ed Krecisz Tue, 08 May 2012 04:52:06 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2855 It probably will not adhere. I would not do it now and wait at least a few months before applying another coat. - TheSealerStore Mon, 07 May 2012 11:08:28 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2850 A few days ago I put Defy Extreme Clear on my hardwood deck. There are some areas that were so weathered that they appear to need a second application. Can this be done without problems? - Scott Tinsley Mon, 07 May 2012 08:48:39 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2848 Diane- I would look at the TWP 1500 Series or the Armstrong Clark Wood Stain. You must have a pigment if you want any kind of UV protection. Thanks - TheSealerStore Mon, 07 May 2012 05:21:39 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2847 Hello, I live in upstate New York. We have an upper and lower deck that spans almost the length of our house. There does seem to be a problem with mold/mildew on the bottom level. We have just completed the process of removing old either solid or semi-solid stain (Cabot) from the railings which is the only part that was stained... flooring was left natural with Thompsons Water Seal applied every year. I know not to use that again. I'm not sure what stain to use now. I'd like to match the railings to my house, which is cedar and stained with a dark brown solid color stain. Not sure whether to use a semi-transparent or semi-solid on the railings. It was quite a job removing the old stain, and I don't want to have to go through all of the steps year. Also, should I put something on the flooring that has some pigment in it to protect it better or is there a clear stain that will offer maximum protection from mold/mildew? Hope you can help; I've been driving myself crazy with this. - Diane Mon, 07 May 2012 05:02:24 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2846 We sell penetrating stains that do not leave a "sheen" on the wood. I am not sure if anything we sell will work for you. - TheSealerStore Mon, 07 May 2012 01:01:16 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2838 I am installing a pressure-treated pine pergola to create a 40 ft colonade leading to my front door. I want to stain it a rich indonesian color. This should not look rustic; it was designed by an architect to look sleek modern asian/japanese. What product do you recommend for a durable, even color and appropriate sheen to hold up near the beach in Florida? I expect to have upkeep but want to start off with the very best product to maintain this architectural statement. Thx!! - Regina Sun, 06 May 2012 12:46:13 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2831 With that poor of penetration you should use a stain that is designed to penetrate exotic hardwoods. You will need to apply annually most likely as it will allow minimal stain penetration, which it turn means quicker fading. Defy Stain for Hardwoods IPE Oil - TheSealerStore Fri, 04 May 2012 09:47:44 +0100 http://www.opwdecks.com/100-wood-and-deck-staining.htm#comment-2830 I forgot to tell you that I live in Minnesota....and also, when I do the "water drop test"..it takes about 3-4 minutes for the droplets to obsorb into the decking. - Linda Nelson Fri, 04 May 2012 07:40:44 +0100