|
Penofin Finish for Hardwood is used for all fine hardwoods
such as IPE, Pau Lope®, Ironwood™, Mahogany, and Teak.
|
|
Maintenance
A maintenance coat of Hardwood Finish should be applied within 3-6 months
after the initial application or as soon as oil looks depleted. The next
maintenance coat should be done again in approximately 10-12 months or
whenever oil looks depleted. Over time, the wood fibers become fully
protected and the maintenance will become less frequent. Wash the wood with
a mild cleanser and warm water. Rinse well. Allow wood to dry for a minimum
of 48 hours before application. Apply maintenance coat of Hardwood Finish.
After 20-30 minutes of absorption time, wipe the surface with a nap-free,
clean, dry cloth.
|
