Thursday, March 11, 2010

Searching for Something?

Restoration Steps

10 Easy Brick Paver Restoration Tips

Must Read!

10 Easy Tips to Help You Restore and Seal Your Brick Pavers

1. If need be it is best to level any pavers that may have settled unevenly. Lift the unlevel brick and level the base by adding slag or heavy sand base. Do this first prior to sealing.

2. It there is an excessive amount of weeds and grass growing in the joint sand, it is best to use roundup first. This will kill the root system of the weeds. Do this a week prior to pressure washing.

   

10 Myths for Wood or Deck Restoration

Must Read!

Top 10 Myths for Exterior Wood and Deck Restoration

1. New wood does not need to be cleaned. This is not true. New wood needs to be prepped with a wood cleaner and a wood brightener. This will remove dirt, grime, and mill glaze. These two steps will "open" the wood pores allowing the stain to penetrate better. The better the wood stain absorbs, the better it will work.

   

101 Wood Deck Restoration Tips!

Must Read! The Most Complete List of Do's and Don'ts for Wood Deck Restoration.

Wess_avatar have been in business since 1993 and have used or sold close to a 1/2 Million gallons of wood stain. These wood and deck restoration tips have come from hands-on experience. A lot of them learned the hard way .Frown Please read this thoroughly as you are sure to learn a few that will make your deck project a success!

We suggest printing this article and reading it a few times before starting your deck restoration project.

   

Wood and Deck Brightening

brighten wood

Brightening Decks/Wood after Cleaning

When brightening Wood or Decks, use a brightening product similar to PowerSolve Wood Deck Brightener or the Defy Deck Brightener. This is extremely important after cleaning or stripping the wood. Not only will this "brighten" the wood, it will also neutralize the cleaner or stripper, ensuring that your deck stain will perform properly.

   

Wood and Deck Stripping

strip deck

Previously Stained Deck/Wood

When removing a failed transparent wood or deck coating it is needed to use a Deck Stripper similar to PowerSolve Wood Deck Stripper or the Defy Wood Deck Stripper. This will soften the old coating allowing easier removal.

   

Wood and Deck Cleaning

pressure wash

New or Gray looking Decks/Wood

When cleaning Wood or Decks, use a cleaning product similar to PowerSolve Wood Deck Cleaner or the Defy Wood Deck Cleaner. This will open the pores and remove any graying and or dirt. This is important even for new wood. New wood has a mill glaze that should be removed prior to any stain application. For removal of old coatings see Wood and Deck Stripping.

   

Stain a Deck in Two Hours

deck_staining

Must Read!

Procedures on Staining a 500 foot Deck in 2 Hours!

How to properly and efficiently stain a 500 foot deck in under 2 hours! It is best to apply a transparent wood or deck stain with a stain pad or by low pressure spraying followed by a stain pad to ensure an even application. This is an example as to how you could stain a 500 square foot deck with railings in 2 hours.

   

Wood and Deck Pressure Washing

pressure_wash_rails We suggest that only experienced professionals use a power washer when deck cleaning or exterior wood cleaning. That being said, it will obviously make your deck cleaning a lot quicker if you do use a power washer. If you use a power washer please follow these guidelines.
   

Page 1 of 2