1 Gallon $22.99

You can choose quantity after clicking on "BUY NOW"
5 Gallon $104.99*
*Free Delivery on all 5 Gallon Buckets. No Limit!
That's a Savings of $20-$35 per Bucket!

SuperSeal- M "Non-Wet Look or Gloss" Concrete Sealer and Water Repellent
 
Breathable Silicone/Silane/Siloxane Water Repellent
  • For Existing and Fresh Concrete
  • Helps protect Concrete From Salt, Freeze, Spalling,  and Water Damages
  • This Product can be used on Composite Decks!
 
This product offers significant advantages:
  • It can be applied to "Green" concrete once bleed water is gone.
  • Prevent Spalling from salt and freeze/thaw damage.
  • Fast beading action-excellent water repellency.
  • Non-SiH: Easy to store and handle.
  • Low VOC-Supports your regulatory compliance efforts.
  • Water Based-Easy to use and clean up.
  • Will not add a slippery film.
SuperSeal Brick-M is a water based Silicone Water Repellent  made of a special hybrid of Silane and Siloxane. SuperSeal-M provides water repellency to porous construction material such as bricks, stone, concrete blocks, Composite Wood Decks, mortar, and grout. It is not suitable for very low-porosity substrates such as polished stone. It will not leave a sheen or "wet" look.
 
The active ingredients in SuperSeal-M Water Repellent Sealer are a mixture of different-size particles, some larger, some smaller to fill different size voids. This ensures good penetration into porous substrates, resulting in good coverage and durable water repellency. Additionally, the active ingredients in SuperSeal-M Water Repellent can chemically react with the substrate, ensuring long-lasting performance.
 
Water Beads up fast on substrates treated with SuperSeal-M Water Repellent Sealer. The product's excellent water repellent and fast beading action are immediately apparent. What you will not see is any change in the substrates appearance.
 
Appearance: Does not alter the appearance when dry. When wet, substrate will repel water.
 

Coverage: One coat is recommended. Approximately 200 feet per gallon depending upon porosity of substrate.
 
Application: May be applied to dry or damp concrete. Fresh concrete should be solid enough to walk on. Protect nearby vegetation and other surfaces made of glass, aluminum, or metal. Apply thoroughly with sprayer, roller, or brush. When spraying, avoid over spray. Rolling is suggested for best results.
 

SSL