|
TWP Wood
Deck Sealer Technical Information
Technical Data:
| Code Number |
% Solids by Weight |
% Solids by Volume |
Weight Per Gallon |
Flash Point Deg.F. |
Viscosity |
VOC (#/gal) |
| TWP® 101 |
20.51 |
19.72 |
6.94 |
105 |
14" Z#2 |
5.52 |
| TWP® 102 |
19.41 |
13.52 |
6.94 |
105 |
14" Z#2 |
5.59 |
| TWP® 103 |
20.41 |
14.96 |
6.93 |
105 |
14" Z#2 |
5.52 |
| TWP® 104 |
21.31 |
15.78 |
6.93 |
105 |
14" Z#2 |
5.45 |
| TWP® 105 |
42.35 |
26.44 |
8.30 |
105 |
16" Z#2 |
4.79 |
| TWP® 106 |
36.02 |
25.83 |
7.58 |
105 |
16" Z#2 |
4.85 |
To the best of our knowledge, this technical data is true and accurate at
the date of issuance, but is subject to change without notice. Liability, if
any, is limited to the replacement of an equivalent amount of new product or
refund to the purchase price. This warranty specifically excludes labor or cost
of labor.
TWP® 100 Clear: Not intended for color
retention. TWP® 100 may be blended with TWP® 101 Cedartone Natural, TWP® 102
Redwood, TWP® 103 Dark Oak, or TWP® 104 Black Walnut, but not to exceed a 1:1
mix ratio. TWP® 101, TWP® 102, TWP® 103, and TWP® 104 may be intermixed for
various color effects. TWP® 105 Cape Cod Gray and TWP® 106 Prairie Gray may only
be intermixed with each other or blended back with TWP® 100 Clear for reduced
color effect. The color of the wood surface has a direct bearing on the finish
appearance. To assure correct color choice, apply a small sample to the
ready-to-coat surface.
Interior Wood: TWP® is for exterior use only.
TWP® is a registered trademark of AMTECO, Inc.
|
