SUREBOND-442 General Stain Remover is a concentrated, non-acid degreaser and general purpose cleaner for use on pavers, concrete and retaining walls. This technologically advanced cleaner removes motor oil, food and beverage stains. It is environmentally friendly and replaces several types of harsh acid cleaners. SB-442 General Stain Remover’s unique Clean Rinse Technology lifting power allows residue to be quickly and easily rinsed away with a high or low pressure water sprayer. SB-442 General Stain Remover’s chemical blend draws out stains from within the surface but does not etch or damage concrete, anodized aluminum or painted surfaces. The product can be used to clean and maintain Surebond sealed pavements as it is compatible with all other Surebond products. It is suitable for both horizontal and vertical surfaces. Phosphate free.
To determine the suitability of this product for a specific surface, test on a small, inconspicuous area first. Inspect area for visible staining to determine stain types and quantity. Sweep and remove all soil and other debris from the surface.
Pre-treat and saturate stained area while dry to increase degreaser effectiveness and to ensure penetration into the textured surface. Add 8 to 16 ounces of concentrate for each gallon of water used, depending on the severity of the stain. Apply using a garden sprayer, low pressure siphon or bulk sprayer. Allow cleaner to soak into the surface for 5 to 10 minutes. Improve results by scrubbing surface with a natural fiber brush to agitate and break down stains. Use a high pressure, hot water wash to draw out and further break down surface stains. Rinse surface thoroughly. It may be necessary to use stronger concentrations and secondary cleanings to remove heavier, deep set stains.
Coverage Per Gallon:
400 + square feet depending on substrate porosity.
Product Data Sheet
- Cleans Oil, Dirt, and Grease
- Does not Damage or Etch Surfaces