Penofin Hardwood Finish

No result

Penofin Exotic Info

Gallon Sizes:	Temperature:	Cleanup:
1's and 5's	45-95 F	Mineral Spirits
Coats Required:	Application Tools:	VOC Compliant: 250
1-2 Coats. 3 hours drying between coats	Sprayer, Pad, Brush, Roller	Compliant in all States
Coverage Per Gallon:	Dry Time:	MSDS
Smooth surfaces: 200-400 sq. ft.	3-12 Hours	Product Data Sheet

Penofin Hardwood Finish

Penofin Finish for Hardwood is used for all fine hardwoods such as IPE, Pau Lope, Ironwood, Mahogany, and Teak.

One-coat application
99% ultraviolet protection via trans oxide pigments
High-grade mildewcide for mold and mildew protection
Penetrates dense hardwood like no other product on the market

Gallon Coverage
300-500 Feet

Maintenance
A maintenance coat of Hardwood Finish should be applied within 3-6 months after the initial application or as soon as oil looks depleted. The next maintenance coat should be done again in approximately 10-12 months or whenever oil looks depleted. Over time, the wood fibers become fully protected and the maintenance will become less frequent. Wash the wood with a mild cleanser and warm water. Rinse well. Allow wood to dry for a minimum of 48 hours before application. Apply maintenance coat of Hardwood Finish. After 20-30 minutes of absorption time, wipe the surface with a nap-free, clean, dry cloth.

Free shipping on all 5 Gallon Pails!