SuperSealVOC Semi-Gloss 5 Gallon

2 Ratings 2 Reviews
$179.99
free shipping with ground services
 Back to: Concrete Sealers

altSuperSealVOC is compliant in all 48 states. Free Shipping!

SuperSealVOC can be used for Stamped Concrete, Stamped Cement, Decorative Cement, Bricks, Acid Stained Cement, Concrete Stains, and Exposed Aggregate. Enhances the natural color of your Brick Pavers and Cement with a "wet" look.

SuperSealVOC can be sprayed on with the Chapin 1949 Concrete Sprayer or applied with a 1/2" roller cover. You cannot use a plastic "inexpensive" sprayer.

SuperSealVOC will help sand erosion reducing the amount of weeds.

One coat is recommended. Coverage is about 100 sq. feet per gallon or 500 sq. feet per five gallon.

One coat will result in a satin/semi-gloss sheen depending on porosity of brick. Extra coats will result in a higher gloss.

 

Reviews

Wednesday, 09 May 2018

Does the gloss fade away in time and just have that wet look without gloss? I find the glossiness a bit tacky. Also, can I use the Supreme Shield SB-350 Low VOC No Gloss later on or do I have to remove SuperSealVOC first?

EdR

Thursday, 02 November 2017

Wet look and semi-gloss sealer for areas that are 250 VOC restricted.

The Sealer Store
Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Gary · 07/31/2018
    Can this product be used indoors on a small 2'x4' brick display?
  • We will reply to your comment shortly
    EdR · 05/09/2018
    Does the gloss fade away in time and just have that wet look without gloss? I find the glossiness a bit tacky. Also, can I use the Supreme Shield SB-350 Low VOC No Gloss later on or do I have to remove SuperSealVOC first?
    • We will reply to your comment shortly
      The Sealer Store · 05/10/2018
      The gloss will fade over time. You can use the SB-350 on it but it will not remove or dull the gloss of the Super Seal Voc.
  • We will reply to your comment shortly
    Mike · 04/25/2018
    Pool deck is increte system with increte clear seal. Time for a recoat, and its hard to obtain the clear seal as a homeowner. This a decent substitute and compatible with the clear seal?
    • We will reply to your comment shortly
      The Sealer Store · 04/25/2018
      As long as the Increte sealer has not yellowed or turned white, then you should be okay to use the Super Seal VOC.
  • We will reply to your comment shortly
    Henry · 02/05/2018
    Why can't this product be spray?
    • We will reply to your comment shortly
      The Sealer Store · 02/05/2018
      SuperSealVOC can be sprayed on with the Chapin 1949 Concrete Sprayer. It will not work with any plastic sprayers. Too thick.
  • We will reply to your comment shortly
    lisa · 11/01/2017
    what parts of AZ can this be shipped to. Our zip is 85248
    • We will reply to your comment shortly
      The Sealer Store · 11/02/2017
      This product is 250 VOC compliant for all areas that have VOC restrictions at 250 or less.
  • We will reply to your comment shortly
    alex · 10/11/2017
    here is a pic, and how many gallo s for an area that big, is prob 40 by 40
    • We will reply to your comment shortly
      The Sealer Store · 10/11/2017
      You will not be able to match new to old exactly. Make sure to clean well all first. The white on the left may be efflorescence and will need to be cleaned off. Try the Supreme Shield SB-600:
      https://www.opwdecks.com/wet-look-no-gloss.htm
      • We will reply to your comment shortly
        alex · 10/11/2017
        the white is just the sand, thats all gone and clean now..... that pic was of when it was just finished. once I do the pressure wash ill will send another pic for a better opinion on your side
  • We will reply to your comment shortly
    alex · 10/11/2017
    I have new and old
    pavers in my driveway, my goals is for the old to match the new, which sealer should I use?
  • We will reply to your comment shortly
    The Sealer Store · 08/28/2017
    Scott T."]Not stamped concrete , but a plastic form that leaves ~1/2" space between cobbles/bricks, which is where the polymeric sand comes in....apply sealer before or after? Thanks!
    [quote name="TheSealerStore"][quote name="Scott T.:
    Is this the right product for new walk made out ofstained concrete mixed on site, and formed with a Quikrete "Walkmaker"? Should sealer be applied before or after polymeric sand? Thanks![/quote]
    Yes, you can use this sealer on this. Polymeric sand is for brick pavers, not stamped concrete.[/quote]

    Apply after the polymeric sand.
  • We will reply to your comment shortly
    Scott T. · 08/28/2017
    Not stamped concrete , but a plastic form that leaves ~1/2" space between cobbles/bricks, which is where the polymeric sand comes in....apply sealer before or after? Thanks!
    TheSealerStore"][quote name="Scott T.:
    Is this the right product for new walk made out ofstained concrete mixed on site, and formed with a Quikrete "Walkmaker"? Should sealer be applied before or after polymeric sand? Thanks![/quote]
    Yes, you can use this sealer on this. Polymeric sand is for brick pavers, not stamped concrete.
  • We will reply to your comment shortly
    The Sealer Store · 08/27/2017
    Scott T.:
    Is this the right product for new walk made out ofstained concrete mixed on site, and formed with a Quikrete "Walkmaker"? Should sealer be applied before or after polymeric sand? Thanks!

    Yes, you can use this sealer on this. Polymeric sand is for brick pavers, not stamped concrete.
  • We will reply to your comment shortly
    Scott T. · 08/26/2017
    Is this the right product for new walk made out ofstained concrete mixed on site, and formed with a Quikrete "Walkmaker"? Should sealer be applied before or after polymeric sand? Thanks!
  • We will reply to your comment shortly
    The Sealer Store · 07/10/2017
    Carrie Hoehenrieder:
    Can this be used on the bullnose brick around our pool. If yes, how do you recommend applying it?

    Yes but you cannot get it in the water. Roll or brush on.
  • We will reply to your comment shortly
    Carrie Hoehenrieder · 07/10/2017
    Can this be used on the bullnose brick around our pool. If yes, how do you recommend applying it?
  • We will reply to your comment shortly
    The Sealer Store · 05/09/2017
    Lenka Brown:
    Hello, I have one year old decorative stamped concrete patio and would like to buy solvent based acrylic sealer with at least 25% of solids, semi gloss finish.

    This would work and is 25% solids.
  • We will reply to your comment shortly
    Lenka Brown · 05/09/2017
    Hello, I have one year old decorative stamped concrete patio and would like to buy solvent based acrylic sealer with at least 25% of solids, semi gloss finish.
  • We will reply to your comment shortly
    The Sealer Store · 08/06/2016
    Yes it is breathable. Only one version and it is a semi-gloss, but shine depends on the porosity of your surface.
  • We will reply to your comment shortly
    pt · 08/05/2016
    This sealer breathable? Also, is there a matte or satin version of it? I live in Cali.
  • We will reply to your comment shortly
    The Sealer Store · 11/30/2015
    This or the Surebond SB-6000
  • We will reply to your comment shortly
    Bruce Weinmaster · 11/26/2015
    What product do you recommend for a paver wet look seal in California?
  • We will reply to your comment shortly
    The Sealer Store · 07/11/2014
    Sorry but we only sell it in 5 gallon pails.
Parameters of Product: Concrete and Brick Paver Sealers
Application Method
Roll or Chapin 1949 Sprayer Only
Interior or Exterior
Exterior
Your Surface Type
Brick Pavers/Stamped/Decorative Concrete
Brands
SuperSeal Sealers
Free Shipping
Yes
Available Sizes
5 Gallon
Water or Solvent Based
Solvent Based
Enhance Look
Wet Look and Gloss