SuperSeal-M 1 Gallon

$27.99
 Back to: Concrete Sealers

Non-Gloss Water Based Sealer

SuperSeal Brick-M is a water based Silicone Water Repellent made of a special hybrid of Silane and Siloxane. SuperSeal-M provides water repellency to porous construction material such as bricks, stone, concrete blocks, mortar, and grout. It is not suitable for very low-porosity substrates such as polished stone. It will not leave a sheen or "wet" look.

The active ingredients in SuperSeal-M Water Repellent Sealer are a mixture of different-size particles, some larger, some smaller to fill different size voids. This ensures good penetration into porous substrates, resulting in good coverage and durable water repellency. Additionally, the active ingredients in SuperSeal-M Water Repellent can chemically react with the substrate, ensuring long-lasting performance.

Water Beads up fast on substrates treated with SuperSeal-M Water Repellent Sealer. The product's excellent water repellent and fast beading action are immediately apparent. What you will not see is any change in the substrates appearance.


This product offers significant advantages:

  • It can be applied to "Green" concrete once bleed water is gone.
  • Prevent Spalling from salt and freeze/thaw damage.
  • Fast beading action-excellent water repellency.
  • Non-SiH: Easy to store and handle.
  • Low VOC-Supports your regulatory compliance efforts.
  • Water Based-Easy to use and clean up.
  • Will not add a slippery film.

Add comment


Security code
Refresh

Comments   

-
Super Seal M is not acrylic and is not designed for wood.
Quote
-
Can Super Seal M clear acrylic sealant be used on wood surfaces?
Quote
re: Can you use the Super Seal-M on asphalt?
No you cannot.
Quote
-
Can you use the Super Seal-M on asphalt?
Quote
re: exterior brick/concrete sealant.
Yes you could use this product to seal your brick. If the water is coming through the brick then it will help by filling the voids of the brick surface with an invisible water barrier.
Quote
exterior brick/concrete sealant.
My house is part vinyl, brick, and concrete, in that order from top to bottom. During heavy rains, Im thinking water is entering through the brick onto the floor of house. Even my carpet is getting wet. I need to know if you have a good durable sealer that I could apply to the exterior. Any help or advice would be greatly appreciated. Thank you.
Quote
re; Is this product safe for a cultured stone hearth?
The SuperSeal-M is a non flammable product. It can be used on all types of porous stone and concrete.
Quote
-
Is this product safe for a cultured stone hearth?
Quote
-
As long as the concrete surface it porous then you can apply the SuperSeal-M. It needs to penetrate to work.
Quote
-
Can Sper SEal M be re-applied to a concrete driveway that was treated once after the concrete dried but appears to not have been applied thoroughly over the whole driveway? There are areas that do not show any beading of water.I think the process was done hit and miss and I did not observe the processs as it was being done.
Quote
-
Yes you can use this product on a brick chimney. With any sealer you should be careful of getting the sealer on the asphalt shingles.
Quote
-
Is this product ok to use for waterproofing chimneys and will it damage asphalt roofing shingles?
Quote
Puddling of Super Sealer M
You can apply the SuperSeal-M as soon as the concrete is visibly dry. You cannot apply if it is wet or not hardened yet. It will not puddle if the concrete is dry.
Quote
Pudding of Super Sealer M
Explain "puddling" of sealer if re-applied and how to prevent it from happening and how to deal with it if it does happen?
Quote
super seal m
If Super Seal M is sprayed directly on newly poured wet concret before it begins to harden,what is the outcome? Can Super Seal M be re-applied at a later time in the correct manner?
Quote
re: Applying SuperSeal-M
It is not applied to wet concrete. It should be visibly dry.
Quote
-
When applying to wet concrete how do you know when you have saturation of surface or is it best to wait until there is drying of the surface?
Quote
re: applying SuperSeal-M with sprayer
There is no "maximum" height to apply. 8-12 inches away from concrete is normal. Just saturate surface until wet then move on. Apply in sweeping motion. It is very easy!
Quote
-
When applying super seal m to a concrete driveway with a sprayer what is the correct procedure? What is the maximum height the sprayer nozzle should be from the concrete to insure maximum coverage?
Quote
Concrete_Sealers
Parameters of Product: Concrete and Brick Paver Sealers
13Application_Method
Both
Application Method
13Interior_or_Exterior
Both
Interior or Exterior
13Your_Surface_Type
All Surface Types
Your Surface Type
13Brands
SuperSeal Sealers
Brands
13Free_Shipping
No
Free Shipping
13Available_Sizes
1 Gallon
Available Sizes
13Water_or_Solvent_Based
Water Based
Water or Solvent Based
13Enhance_Look
No Wet Look or Gloss
Enhance Look