SB-8700 Wet Look/Gloss Sealer 5 Gallon

0 Rating
free shipping with ground services
 Back to: Concrete Sealers

Wet Look. Gloss, and Joint Stabilizing Sealer

SB-8700 will seal and enhance the beauty of new and old concrete, masonry and related surfaces. In addition, SB-8700 will stabilize the joint sand creating a long lasting hardened joint. It is ideal for Interlocking concrete pavers, stamped concrete, or masonry surfaces giving them an enhanced, wet look, glossy finish. SB-8700 is the perfect product to restore the look and elegance of old/tired pavers. Also works on limestone, sandstone, clay and natural stones.

What makes SB-8700 Wet Look Joint Stablizing Sealer different?

  • 2 in 1 Product - Seals with a luxurious, enhanced wet look and stabilizes joint sand
  • Gloss Finish
  • Resistant - Helps create a sand joint that is resistant to weeds and insects
  • Water Repellant/Rain Safe - Water repellent qualities and “Rain Safe” within 90 min.
  • Anti-Fungal - Prevents mold, algae and moss
  • Breathable - Can be applied immediately to new installations; will not trap naturally occuring efflorescense

SB-8700 is an advanced premium acrylic sealer that will not yellow under exposure to sunlight. SB-8700 is a 2 in 1 product; it protects the substrate surface and stabilizes jointing sand at the same time. SB- 8700 is specially formulated with antifungal agents designed to help inhibit the growth of mold, fungi and moss on horizontal pavement surfaces. It forms a tenacious bond to the concrete or masonry surface. The high solids formula combines properties of adhesion, flexibility and UV light resistance to provide a long lasting surface seal and sand joint. SB-8700 will penetrate the substrate and provide a protective layer on the surface that is resistant to mild acid, alkali, and salt attacks. SB-8700 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear. SB-8700 can be applied immediately after paver installation, as it is breathable and will not trap the naturally occurring efflorescence. SB-8700 is an advanced formula that makes it “rain safe” in 90 minutes.


100-200 Sq. Feet Per Gallon


There are yet no reviews for this product.

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Janice · 01/31/2023
    What do I use to remove this?  After several years, the coating is turning white.  Need to strip it and start over.
  • We will reply to your comment shortly
    The Sealer Store · 08/05/2016
    This product is not thick enough to have a non skid additive added. Lasts about 2 years.
  • We will reply to your comment shortly
    James Grier · 08/04/2016
    Can none skid material be added to the sealer and approximately how long does it last on a driveway in Florida.
  • We will reply to your comment shortly
    Sam Good · 10/07/2014
    Does the SB-8700 really leave a wet look and high gloss finish?
Parameters of Product: Concrete and Brick Paver Sealers
Application Method
Roll or Chapin 1949 Sprayer Only
Interior or Exterior
Your Surface Type
Brick Pavers/Stamped/Decorative Concrete
Free Shipping
Available Sizes
5 Gallon
Water or Solvent Based
Solvent Based
Enhance Look
Wet Look and Gloss