MasonrySaver Decorative Concrete Sealer 1 Gallon

$41.00
 Back to: Concrete Sealers

Seals and protects stamped concrete, decorative concrete, brick, stone and other masonry surfaces from damage and color loss while enhancing the similar to a "wet look".


MasonrySaver® Decorative Concrete Sealer is a non-yellowing acrylic polymer blend sealer formulated for use on properly cured stamped concrete surfaces. Can be applied over both water based and solvent based sealers that have been used previously without having any adhesion issues.

Designed for use on both interior and exterior concrete, MasonrySaver® Decorative Concrete Sealer is suitable for use on a variety of surfaces where a durable gloss finish is desired including concrete patios, driveways, sidewalks and even garage floors.

Product Uses:

  • Stamped Concrete
  • Decorative Concrete Surfaces
  • Brick Pavers
  • Acid Stained Patios
  • Garage Floors
  • Basement Floors

Benefits:

  • Can be applied over previously treated surfaces with solvent-base sealer
  • Water-based formula for easy application and rapid dry time
  • Provides an attractive, gloss finish to masonry and concrete surfaces
  • Protects masonry and concrete surfaces from color fade
  • Seals concrete surfaces making them washable and easy to maintain
  • Non-yellowing, clear finish
  • Durable concrete protection with "hot tire" resistance

LIMITATIONS: Not suitable for use over asphalt surfaces. This product is designed for use on horizontal or vertical surfaces. Do not use on below-grade surfaces that are subject to severe hydro-static pressures. When using in areas subjected to hot tire traffic, allow adequate time for product to cure before putting the area back into surface. When applying over previous coating, hot tire resistance maybe compromised. Do not use if the area will be exposed to softer, high performance tires. Will not "fix" old sealers or coatings that have blushed or turned milky white.

Add comment


Security code
Refresh

Comments   

-
Kathleen, our products are for outside use. I am not sure what would be best for an interior slate surface.
Quote
Slate back splash
I have just installed a decorative slate back splash in my kitchen. They are 2 inch tiles in different colors. I want to seal it and protect it. I'm not sure which product I should use.
Thanks for your help.
Kathleen
Quote
Concrete_Sealers
Parameters of Product: Concrete and Brick Paver Sealers
13Application_Method
Both
Application Method
13Interior_or_Exterior
Both
Interior or Exterior
13Your_Surface_Type
Brick Pavers/Stamped/Decorative Concrete
Your Surface Type
13Brands
MasonrySaver
Brands
13Free_Shipping
No
Free Shipping
13Available_Sizes
1 Gallon
Available Sizes
13Water_or_Solvent_Based
Water Based
Water or Solvent Based
13Enhance_Look
Wet Look and Gloss
Enhance Look