Defy Extreme Clear 5 Gallon

$220.32
free shipping with ground services
 Back to: Defy Wood Deck & Concrete Products

Defy Extreme Clear Stain is Now in Stock!

Free shipping on all 5 Gallon Pails!

Defy Extreme Wood Stain has been formulated using state of the art Nano-Technology to create a level of durability that has not been available in a clear wood stain in the past.

The Nano Particles are similar to Sunscreen. When the Particles are distributed at a rate of over 30 trillion per square inch, they will reflect the sun and provide UV protection that has never been seen in a "Crystal" Clear Wood Finish. A clear finish that protects wood from graying.

This is a First in the Industry!

Defy Extreme Wood Stain:

  • Crystal Clear finish without any tint
  • Water-Based with easy soap and water cleanup
  • VOC Compliant
  • Leading protection that will outperform all clear wood stains

Defy Extreme goes on milky white and dries to a clear, flat finish with little to no change to the natural look of your wood. It is sold in 1 and 5 gallon containers and covers 100-150 square feet per gallon depending on wood texture and porosity.

Coverage Rate:(2 Coats)
Wood Decks 100-150 sq. feet per gallon for 2 coats.

Product Data Sheet

Parameters of Product: Deck/Wood Stains
Available Sizes
5 Gallon
Brands
Defy
Coats Needed
2 Coats Wet on Wet
Free Shipping
Yes
Oil or Water Based
Water Based
Stain Transparency
Clears
Your Wood Type
All Wood Types Cedar/Redwood/PTP/Etc
Horizontal or Vertical Surfaces
Both
Low VOC State
Yes

Add comment


Security code
Refresh

Comments   

-
Use the Armstrong Clark for this.
Quote
-
I have a a 500 square foot cedar deck that was initially stained using sikkens cetol srd. After 2 yrs the stain was fading a gone from heavy wear areas, so as per product recommendations we cleaned the deck and recoated, but it became evident that this was no going to look good as the heavy wear areas were significantly lighter in color and the stain was very dark where in areas with less wear. We ended up stripping the newly applied stain and sanding the whole top surface of the deck to re-apply the sikkens stain. We are another another 2 years down the road and I would like to sand the whole deck and start with a new system. I am in Canada and looking at either Defy Extreme or Armstrong Clark as options but I want a system that I can maintain to look good without sanding the deck down. Which of these 2 systems would you recommend, and I should mention that this deck is south facing so it gets significant sun exposure. Also, can you seal an oil stain like Armstrong Clark with a product like Defy Extreme Clear after the oil stain has cured?
Quote
re: I am interested in the Defy Extreme Clear
Defy Extreme is better then Flood but the best would be one the Defy Extreme in one of the three tints: Defy Extreme Stain (www.opwdecks.com/.../)

Make sure to remove the Flood first.

"Wet on Wet", means apply your first coat then apply your second coat within 20-120 minutes after.
Quote
-
I am interested in the Defy Extreme Clear. I applied flood CWF-uv5 last year and very dissapointed with the results. How does Defy compare to Flood and what is Wet on Wet?
Quote