Restore-A-Deck Package 600

$119.99
free shipping with ground services
 Back to: Deck Cleaners - Professional Grade

Our most popular kit provides enough product to clean and then brighten a 30x20 deck with rails and 5 steps. For a fence this package will clean and then brighten both sides of 90 feet of fence.

You will receive 2 containers of Step 1 Wood Cleaner and 2 containers of Step 2 Wood Brightener.

Leftover product can be used to clean concrete, house siding, lawn furniture and awnings. (Do not use over grass, clean furniture on a hard surface)

A certified wood contractor would charge about $350 to perform this service for you. Similar products like Cabot's Problem Solver stripper and brightener would cost $150.

Restore-A-Deck Step 1 is a wood cleaner and preps stains for reapplication of a stain. It is not a stain stripper or remover of old stains. Please see Restore-A-Deck Stripper if you are trying to remove a semi-transaprent stain.

Reviews

Friday, 05 May 2017

Clean and brighten your wood deck with this kit.

The Sealer Store

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Gretchen Mayes · 06/23/2022
    I have a 10' x 30' IPE deck.  10' x 20' of that deck is covered.  We live on the Gulf of Mexico in the panhandle of Florida.  I last stained this deck (using Penofin, if I remember correctly) spring of 2018 and have done nothing to it since.  The IPE is in good condition and I need to clean it up and stain it.  I used a brush in the past to stain the deck and then wiped the excess with a lint-free cloth.  It was a lot of work but looked great when it was done.  The deck has been in place since 2011.
    Please recommend a cleaner and/of brighter and of course a stain.  I would prefer a stain that is not on the red side.  Thanks in advance.
    Gretchen Mayes
  • We will reply to your comment shortly
    The Sealer Store · 07/08/2014
    You should not have to worry about fuzzies when already stained and yes the RAD will rep for another coat. Light coat will help.

    Thanks
  • We will reply to your comment shortly
    Ian FitzGerald · 07/07/2014
    Last year I built a cedar deck and used the Restore-A-Deck cleaner/brightener on it before applying Armstrong-Clark Amber semi-transparent stain. Much of the cedar got sun-damaged and grey before I had a chance to stain it, and the deck cleaner left tons of fuzzy fibers that I had to sand off prior to staining (that's my fault for waiting so long, not RAD's fault). The stain on some of the horizontal boards is looking a little thin now, and I'm thinking about applying another coat of stain to the whole deck. Is RAD appropriate for prepping my deck for restaining? Is another coat on the whole deck a good idea? Will I need to worry about fuzzies again?
  • We will reply to your comment shortly
    The Sealer Store · 06/03/2014
    You do not need the cleaner if using the stripper.
  • We will reply to your comment shortly
    Gary Hill · 06/02/2014
    I have an old deck (25yrs) still in good condition. I would like to strip old stains with RAD. I know I have to use the brightener also. Should I also use the cleaner if I have already power washed the deck?
  • We will reply to your comment shortly
    The Sealer Store · 10/02/2013
    Please call office. They will replace what is damaged. Sorry about this.
  • We will reply to your comment shortly
    JP · 10/02/2013
    I ordered a pail of stain and this restore a deck package 600 and found them on the doorstep today. Opened the package with the 4 restore a deck containers and both containers of brightener were opened and spilled a large amount of the powder in the box and was all over the outside of the box. Let's just say I'm not a happy camper. Is there some way we can make this right? I took a couple photos of the package if you want verification.
  • We will reply to your comment shortly
    The Sealer Store · 07/28/2012
    Yes all new wood needs to be cleaned and brightened before staining. The RAD products are mixed with water and best applied with a pump sprayer then lightly pressure washed or heavy scrubbed. Both stains would work well with new PTP wood.
  • We will reply to your comment shortly
    DuWayne Lund · 07/27/2012
    I am new at this, I have a new deck three months old it is PTW in the gold tone or cedar color. I think I will need to clean it before I stain it, is that right?
    With the Restore-A-Deck package I see that I will receive 2 containers of Step 1 Wood Cleaner and 2 containers of Step 2 Wood Brightener. How is this product used? How long a wait time to do the staining?
    Also I see you recommend both Timber Oil and Armstrong Clark for the stain. Is one of the two any better for the new pressure treated pine?
  • We will reply to your comment shortly
    The Sealer Store · 10/06/2011
    Penofin's clear/natural is not a true clear. It is a lightly pigmented stain.
  • We will reply to your comment shortly
    gail · 10/05/2011
    I used Penofin clear/natural with no stain. So it is not stain remaining. It is still black from mold/mildew. Would using bleach 1 time damage the wood?
  • We will reply to your comment shortly
    The Sealer Store · 10/05/2011
    Step 1 is a wood deck cleaner not a stain stripper. I suspect that the old stain is not coming off completely. You could try the bleach but if that does not work then you should use a deck stain stripper ([url]http://www.opwdecks.com/wooddeckstrippers.htm[/url]). Brighten everything when done.
  • We will reply to your comment shortly
    gail · 10/05/2011
    Sorry, forgot to specify, that I'm using Restore-a-Deck product.
  • We will reply to your comment shortly
    gail · 10/05/2011
    Just used step 1 on my Mahogany deck. Had to do alot of brushing to clean the black (mold and mildew). Had used Penofin last year, 1 coat when the deck was new. Will the brightener take the black spots off or should I spot treat them with bleach? I don't have any Deck cleaner left.
    I haven't used the brightener yet. It's a 2 day job.
  • We will reply to your comment shortly
    The Sealer Store · 09/04/2011
    Most likely you will need to apply a stain if you do not have a coat on already or if your current stain has deteriorated.
  • We will reply to your comment shortly
    Bud J · 09/04/2011
    Do I need to reapply stain after using this? Thanks.
  • We will reply to your comment shortly
    The Sealer Store · 06/06/2011
    Pre wet and rinse is all you need to do.
  • We will reply to your comment shortly
    Gary Rowland · 06/06/2011
    Do shrubs need to be protected from this product or will rinsing off all areas prevent any killing of the plants?
  • We will reply to your comment shortly
    dave canale · 05/10/2011
    hi scott

    sorry. i see you answered this already but I didnt go down far enough to see. thanks

    dave
  • We will reply to your comment shortly
    dave canale · 05/10/2011
    hi scott
    is restore a deck a cleaner/brightener or a stripper/brightener? i have a lot of mold and mildew after applying penofin last year and plan on using the red label this year but i notice there is still a bit of stubborn old stain in some spots and i want to get that off too. will this also act as a stripper or would I be better off with a seperate stripper thanks

    dave
Parameters of Product: Prepping Products
Brands
Restore A Deck
Available Sizes
Powder Concentrates
Type
Wood/Deck Cleaner