Flood CWF-Hardwood Stain 1Gallon

0 Rating
Stain Color
 Back to: Flood Wood Stain

CWF Colors

Free shipping on all 5 Gallon Pails!

Flood CWF Hardwoods Clear Wood Finish
Penetrating Water-Borne Natural Wood Finish

CWF Hardwoods Clear Wood Finish penetrates and bonds to exterior wood providing a flexible, long lasting rich matte finish, even on tough exotic hardwoods such as Ipe, Pau Lope, Ironwood and Mahogany. FloodPro Supreme Performance saturates, seals and stabilizes wood to minimize cracking, warping and other damage caused by moisture and sun. The unique formula, combined with premium U.V.-absorbing transoxide pigments, provides a finish that accentuates the beautiful color of your wood for years to come.

Where To Use

  • All new and weathered exterior woods including T1-11, Cedar, Redwood and Pressure-Treated Wood
  • New and weathered exotic hardwoods such as, Ipe, Pau Lope, Ironwood, Mahogany and Teak
  • Horizontal and vertical surfaces such as decks, siding, fences and furniture


  • Rough Surfaces 100 - 150 sq. ft.
  • Smooth Surfaces 200 - 350 sq. ft.


  • Apply between 50 and 90 F. Do not apply in hot sunlight.
  • Do not apply if cold, wet weather is expected within 24 hours.
  • Do not thin - use as is.
  • Apply with one or combination of the following - Brush: High quality synthetic stain brush, Roller: Synthetic woven cover 3/8-3/4 inch,
    Spray: Air-Less Sprayer .011 - .015 fluid tip/ 700-800 psi or less, or garden sprayer.
  • Stir thoroughly before and periodically during application.
  • Apply one coat of FloodPro Supreme Performance.
  • Apply a second coat as soon as the wet look dulls (30-60 minutes) or anytime thereafter.
  • After sprayer or roller application, backbrush to improve penetration
    and uniformity of coverage.
  • Wipe up or brush out any puddles to avoid shiny areas, (within 30 minutes).
  • Cover everything you do not wish to coat, including plants and shrubs.

Dry Time
24 hours


There are yet no reviews for this product.

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    The Sealer Store · 02/23/2009
    This product is a water based stain. It does not contain linseed oil and does not promote mildew/mold growth. Take in consideration that mold/mildew can grow on any surface.
  • We will reply to your comment shortly
    mike · 02/23/2009

    Does your hardwood stain contain any linseed oil and does it support mildew growth? I am planning to use it on a mahogany deck. Thanks.
Parameters of Product: Deck/Wood Stains
Available Sizes
1 Gallon
Coats Needed
1 Coat
Free Shipping
Oil or Water Based
Water Based
Stain Transparency
Your Wood Type
Exotic Hardwoods/Ipe
Horizontal or Vertical Surfaces
Low VOC State