MasonrySaver Decorative Concrete Sealer
MasonrySaver Decorative Sealer Info
| Gallon Sizes: | Dry Time: |
| 1's and 5's |
4-6 hours for foot traffic, 4 days for automobiles. Allow 48 hours before waxing. |
| Coverage Per Gallon: | Cleanup: |
| Approx. 100-150 sq. ft. per gallon |
Soap and Water |
| Temperature: | VOC Compliant: |
| 40 F Minimum |
Yes for all states |
| Application: | More Info: |
| Pump Sprayer, Roller |
Product Data |
| Seals and protects stamped concrete, decorative concrete, brick, stone and other masonry surfaces from damage and color loss while enhancing the similar to a "wet look". MasonrySaver® Decorative Concrete Sealer is a non-yellowing acrylic polymer blend sealer formulated for use on properly cured stamped concrete surfaces. Can be applied over both water based and solvent based sealers that have been used previously without having any adhesion issues. Designed for use on both interior and exterior concrete, MasonrySaver® Decorative Concrete Sealer is suitable for use on a variety of surfaces where a durable gloss finish is desired including concrete patios, driveways, sidewalks and even garage floors. Product Uses:
LIMITATIONS: Not suitable for use over asphalt surfaces. This product is designed for use on horizontal or vertical surfaces. Do not use on below-grade surfaces that are subject to severe hydro-static pressures. When using in areas subjected to hot tire traffic, allow adequate time for product to cure before putting the area back into surface. When applying over previous coating, hot tire resistance maybe compromised. Do not use if the area will be exposed to softer, high performance tires. Will not "fix" old sealers or coatings that have blushed or turned milky white. Free shipping on all 5 Gallon Pails! |