SuperSeal30 Gloss 5 Gallon

4 Ratings 3 Reviews
$199.99
free shipping with ground services
Stain Color
 Back to: Concrete Sealers

This Product is not VOC Compliant in Every State.
altClick here for a VOC Compliant Product

SuperSeal30 can be used for Stamped Concrete, Stamped Cement, Decorative Cement, Concrete Brick Pavers, Acid Stained Cement, Concrete Stains, and Exposed Aggregate. SuperSeal enhances the natural color of your Brick Pavers and Decorative Concrete with a "wet" look.

SuperSeal30 can be applied with a 1/2" roller cover. You cannot use a sprayer.

SuperSeal30 will help sand erosion reducing the amount of weeds. One coat is recommended.

Coverage is about 100 sq. feet per gallon or 500 sq. feet per five gallons. One coat will result in a high gloss sheen depending on porosity of brick. Extra coats will result in a higher gloss.

Note: Super Seal 30 is not suggested for Clay Pavers.

Super Seal 30 Comes in Clear and Brown Tinted

Super Seal 30 in Clear on Exposed Aggregate

Super Seal 30 Clear

Super Seal 30 in Brown Tinted on Exposed Aggregate

Super Seal 30 Brown Tinted

 

Reviews

Monday, 01 November 2021

Used 11 gallons of this sealant with the brown tint on aggregate concrete driveway, steps, porch & patio. It is easily applied with a roller covering completely and uniformly this type surface. I applied 1 thorough heavy coat rolling same area slowly multiple times. The final appearance was deep, dark, rich, wet and at closeup view glossy. Repels moisture very well, especially on flat surfaces where water formerly absorbed into surface for days at a time. I discovered how slick the surface can be after application and rain especially on a sloped driveway when our FWD Van spun out halfway when climbing up. I noticed the store sells Super Grip but was out of stock at the time. I recommend this product for your surface protection due to its high quality and affordable price.

Jeff

Tuesday, 30 July 2019

Awesome Sealer!

The Sealer Store

Saturday, 21 February 2009

Awesome product for a high gloss

The Sealer Store
More reviews

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Mike Ruffine · 10/24/2021
    I just finished a paver project in my backyard. There is efflorescence on roughly half of the pavers. Can I use SuperSeal30 before the efflorescence naturally goes away or should I wait until the issue has cleared up from regular scrubbing and time?  Thanks
    • We will reply to your comment shortly
      The Sealer Store · 10/24/2021
      You cannot seal over efflorescence. It had to be removed. 
  • We will reply to your comment shortly
    Bud Brasier · 10/01/2021
    We need to seal the concrete pavers around our pool. We had them sealed about 3 years ago with a water based sealer, but they now look dry and unsealed.  We have power washed them and they are ready to be sealed.  I am thinking of using the SuperSeal30 Concrete Higher Gloss Sealer. I estimate I will need 3 - 5 gal containers.  Am I approaching this correctly?  See photos of the current patio.
    • We will reply to your comment shortly
      The Sealer Store · 10/01/2021
      Yes, that is correct.
      • We will reply to your comment shortly
        Bud Brasier · 10/01/2021
        I am going also spray on copper sulfate to minimize mold and algae growth.  Should that go on before or after the sealer?
        • We will reply to your comment shortly
          The Sealer Store · 10/01/2021
          Not sure if that will work for you. Best to avoid that on concrete.
  • We will reply to your comment shortly
    Joe Fitzgerald · 09/26/2021
    I have a stamped colored concrete patio.  Would the clear be okay for colored stamped concrete and does the grip get put down separately?  Thank you.
  • We will reply to your comment shortly
    MKMK · 09/05/2021
    Where can I get SS 30 in NE Missouri or Eastern Iowa?
  • We will reply to your comment shortly
    quin · 08/18/2021
    what is drying time
  • We will reply to your comment shortly
    Jon · 08/09/2021
    Can this be used on split face masonry block?
  • We will reply to your comment shortly
    Paul Thomas Arrivolo · 07/20/2021
    How Dark is the brown tint
    • We will reply to your comment shortly
      The Sealer Store · 07/20/2021
      Color varies based on the surface and surface type. The pictures above explain the difference as best as possible.
  • We will reply to your comment shortly
    yugeen · 07/18/2021
    Do you use the 1/2 inch roller cover on exposed aggregate or does exposed aggregate require a different size?  
  • We will reply to your comment shortly
    David Shaw · 07/03/2021
    I have used your products in the past and have been very satisfied.  However, in your current products you indicate a high gloss wet-look brown tinted super sealer - 30.  Can I obtain a sample of this product?   Sorry, I don't remember my username or password
  • We will reply to your comment shortly
    Ro · 06/29/2021
    I have exposed aggregate indoors in a 3 season porch. Water from chlorinated hot tub leaves white residue stains. What should I use to remove these stains (on indoor exposed aggregate)?  Thank you 
    • We will reply to your comment shortly
      The Sealer Store · 06/29/2021
      We do not have anything that will remove this nor do we think this is even possible. Sorry.
  • We will reply to your comment shortly
    cathy raymond · 06/10/2021
    is super seal 30 similar to super diamond clear?
    • We will reply to your comment shortly
      The Sealer Store · 06/10/2021
      Simials but better as it is breathable while the Diamind clear is not.
  • We will reply to your comment shortly
    John · 05/30/2021
    What’s the shelf life on any extra sealer store in original container?
  • We will reply to your comment shortly
    Myra Stuart · 05/27/2021
    What size roller nap should I use on stamped concrete?
  • We will reply to your comment shortly
    Charles · 05/20/2021
    I have a stamped concrete patio around my I ground pool. I like the high gloss finish but want to make sure the deck is not slippery. What would you recommend? It was treated when new but it only lasted a very short time after the contractor applied whatever he used. 
    • We will reply to your comment shortly
      The Sealer Store · 05/20/2021
      Use the SS30. You can also add the Super Grip for traction. 
  • We will reply to your comment shortly
    Jeff · 05/18/2021
    I'm also doing my exposed aggregate driveway, I've seen a lot of people use a spray to seal there driveway, what would you recommend works best? 
    • We will reply to your comment shortly
      The Sealer Store · 05/18/2021
      The SS30 works best for aggregate but it cannot be sprayed. Too thick. Just roll it on.
      • We will reply to your comment shortly
        Jeff · 05/18/2021
        ok thanks
  • We will reply to your comment shortly
    Mason · 05/18/2021
    If i were to seal my exposed aggregate driveway, would all i need to do is, clean up my driveway with a pressure washer and then apply this SS30 with a roller, and it will be good?
    • We will reply to your comment shortly
      The Sealer Store · 05/18/2021
      Yes, but you will have to let it dry for 48 hours after the cleaninig.
      • We will reply to your comment shortly
        Mason · 05/18/2021
        thanks, and it would be good quality, and would'nt need to be sealed for another 2 years? also had another question, would i need to use certain cleaners to take off grease and dirt stains, before applying the SS30, or would a solid pressure wash be fine?
        • We will reply to your comment shortly
          The Sealer Store · 05/18/2021
          Yes, about every 2 years is normal. You have to clean any stains prior to sealing. Pressure washing does not remove grease.
          • We will reply to your comment shortly
            Mason · 05/18/2021
            thanks, and 48 hours for SS30 dry, or the Water from the cleaning?
            • We will reply to your comment shortly
              The Sealer Store · 05/18/2021
              48 hours after cleaning to seal. Dries in 4-6 hours.
  • We will reply to your comment shortly
    bill · 05/06/2021
    can it be used on concrete?
  • We will reply to your comment shortly
    Susan · 05/04/2021
    Which is best to treat an exposed aggregate concrete patio, SS30 or Supreme Shield 600? Has not been treated in probably 6+ years. I’m wanting the wet look with brown tint. Should I use a 1/2” nap roller and should I back roll? Also, there’s a crack, okay to use Super Seal Crack Filler for exposed aggregate concrete? And do you ship to Indiana?
    • We will reply to your comment shortly
      The Sealer Store · 05/04/2021
      Use the SS30 in the Brown tint. Just roll it on. You can use the filler for the crack.
  • We will reply to your comment shortly
    Jim D · 05/02/2021
    I sealed a brick paver patio with Valspar sealer and now it does not look like it was sealed. Do I need to do any special cleaning to switch to SS30?
    • We will reply to your comment shortly
      The Sealer Store · 05/03/2021
      Hard to say as it depends on the type of sealer it was and if the surface is porous or not?
  • We will reply to your comment shortly
    BILL · 04/29/2021
    CAN IT BEUSED ON PRESSURE TREATED WOOD
Parameters of Product: Concrete and Brick Paver Sealers
Application Method
Roller
Interior or Exterior
Exterior
Your Surface Type
Brick Pavers/Stamped/Decorative Concrete
Brands
SuperSeal Sealers
Free Shipping
Yes
Available Sizes
5 Gallon
Water or Solvent Based
Solvent Based
Enhance Look
Wet Look and Gloss