SuperSeal30 Gloss 5 Gallon

3 Ratings 3 Reviews
$164.99
free shipping with ground services
Stain Color
 Back to: Concrete Sealers

This Product is not VOC Compliant in Every State.
altClick here for a VOC Compliant Product

SuperSeal30 can be used for Stamped Concrete, Stamped Cement, Decorative Cement, Concrete Brick Pavers, Acid Stained Cement, Concrete Stains, and Exposed Aggregate. SuperSeal enhances the natural color of your Brick Pavers and Decorative Concrete with a "wet" look.

SuperSeal30 can be applied with a 1/2" roller cover. You cannot use a sprayer.

SuperSeal30 will help sand erosion reducing the amount of weeds. One coat is recommended.

Coverage is about 100 sq. feet per gallon or 500 sq. feet per five gallons. One coat will result in a high gloss sheen depending on porosity of brick. Extra coats will result in a higher gloss.

Note: Super Seal 30 is not suggested for Clay Pavers.

Super Seal 30 Comes in Clear and Brown Tinted

Super Seal 30 in Clear on Exposed Aggregate

Super Seal 30 Clear

Super Seal 30 in Brown Tinted on Exposed Aggregate

Super Seal 30 Brown Tinted

 

Reviews

Monday, 01 November 2021

Used 11 gallons of this sealant with the brown tint on aggregate concrete driveway, steps, porch & patio. It is easily applied with a roller covering completely and uniformly this type surface. I applied 1 thorough heavy coat rolling same area slowly multiple times. The final appearance was deep, dark, rich, wet and at closeup view glossy. Repels moisture very well, especially on flat surfaces where water formerly absorbed into surface for days at a time. I discovered how slick the surface can be after application and rain especially on a sloped driveway when our FWD Van spun out halfway when climbing up. I noticed the store sells Super Grip but was out of stock at the time. I recommend this product for your surface protection due to its high quality and affordable price.

Jeff

Tuesday, 30 July 2019

Awesome Sealer!

The Sealer Store

Saturday, 21 February 2009

Awesome product for a high gloss

The Sealer Store
More reviews

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    calidude · 05/23/2020
    Another pic.
  • We will reply to your comment shortly
    calidude · 05/23/2020
    Bought a house - I believe we have stamped concrete here. White spots and hairline cracks in several places. Not sure what was used on this previously. What are my steps here - would like a rich -wet look.
  • We will reply to your comment shortly
    naz1399@aol.com · 05/14/2020
    superseal30 over superseal25. is that ok? i will be powerwashing the stamped concrete first.
  • We will reply to your comment shortly
    Steve · 04/27/2020
    Is it slippery to walk on when it's wet
    • We will reply to your comment shortly
      Ken Hagler · 05/18/2020
      I just applied SuperSeal 30 to my 15 degree slanted aggregate driveway on Saturday and Monday morning it was not slippery when walking downhill to my vehicle with my dress shoes on in the rain. Very pleased!
  • We will reply to your comment shortly
    RANDY · 04/22/2020
    HELLO MY NAME IS RANDY , I LIVE IN THE STATE OF WASHINGTON AND WILL BE BUYING EATHER SUPER SEAL 30 OR 25. QUESTION NO. 1 I HAVE A STAMPED CONCRETE PATIO COLOR DARK COFFEE. I HAVE SOME HAZING AND SOME STAINING. WITCH PRODUCT WILL BE THE BEST ON COVER UP. QUESTION NO. 2 I AM THE THE PROCESS OF SELLING MY HOME AND DELIVERY TIME COULD BE A BIG PROBLEM.
    STAY SAFE !!
    • We will reply to your comment shortly
      The Sealer Store · 04/22/2020
      You cannot fix a white haze by adding more sealer on top. It would have to be stripped off first. https://www.opwdecks.com/paver-sealer-stripper.htm
      • We will reply to your comment shortly
        Randy Engelgau · 04/22/2020
        I was told that if I wet the area this will show you what it will look like after using a sealer? The haze I have disappears after on a wet surface. If I order how long will it take to receive the product?
        • We will reply to your comment shortly
          The Sealer Store · 04/23/2020
          It may go away temporarily but it will most likely come back as the issue causing the white has will still be there.
  • We will reply to your comment shortly
    yader · 04/08/2020
    is it really necessary to clean up my stamped concrete patio with xylene after sealing it or its optional? whats the purpose of using xylene?
    • We will reply to your comment shortly
      The Sealer Store · 04/09/2020
      Xylene is not a cleaner that is used for the patio. It cleans applicator tools.
  • We will reply to your comment shortly
    Antonia Williams · 03/24/2020
    will this product be slippery when wet?
  • We will reply to your comment shortly
    Sunset Seeker · 03/10/2020
    Oh by the way, i tried acetone, premium stripper, mineral spirits, xylene.
    • We will reply to your comment shortly
      The Sealer Store · 03/10/2020
      It will have to chemically strip with heavy pressure washing to fix this. Your issue is it cannot get into the pool and it seems you have no way to rinse it away as the area looks to be enclosed with screens and doors. Honestly, you will not be able to strip this unless you close the pool and take down the screen porch area.
      https://www.opwdecks.com/paver-sealer-stripper.htm

      Without removing it fully you will not be able to prevent the white haze from returning.
  • We will reply to your comment shortly
    Sunset Seeker · 03/10/2020
    I have dark charcoal grey stamped concrete pool deck and covered patio area that is 30 yrs old in SW FL. I just replastered pool and concrete paver coping in charcoal grey also. I used Thompson seal on it 10-12 yrs ago. I see white haze on areas on edge of screen and deck. the covered area has held color good but aggregate showing where walkways, edge pool where driveway pressure washer washed off sealer and alot of color. I want to stain with color to areas aggregate is showing, and blend in it. i tried a spot looks good, but needs sealed to stay. then reseal. But not sure what to do about coping #1. seal or no seal? and white spots, they show when wet better. I tried xylene, muriatic acid, paint thinner, it just turned whiter and more haze. What do you suggest? 4500 psi pressure wash with a stripper? Any advice would greatly be appreciated!!
    • We will reply to your comment shortly
      Sunset Seeker · 03/10/2020
      Heres some pics of deck area. you can see where its worn, loss color. I put a xylene based sealer in a spot, and left it 2 months, pressure washed and it came right up. So i know xylene based sealer wont work. In a pic u can see where i used Xylene, paint thinner, to try remove. those are the discolored spots. Whats your recommendation? thk u very much.
    • We will reply to your comment shortly
      The Sealer Store · 03/10/2020
      We would need pictures to help with this white haze.
      • We will reply to your comment shortly
        Sunset Seeker · 03/10/2020
        pics wont post trying again. thk u
      • We will reply to your comment shortly
        Sunset Seeker · 03/10/2020
        I posted pics on old post, and posted more on this post reply. thk u. I dont want it to glossy either, But want to add color, not sure if i should use dye or stain, water based or acetone based.. and then seal. the one pic is with water on it. But I also have the coping that im not sure what to do with, it looks like grout haze is on them as well as spots on the deck where it meets coping that im not sure what to do to get mud, mortar, haze ect. off either. Thks for your quick response!!
  • We will reply to your comment shortly
    Thomas Donahue · 01/25/2020
    Hello! I used super seal 30 on my paved driveway and during the peak of the summer the pavers turned yellow and the gloss quickly faded what should I use to strip the driveway and is there a product that stands up to the Arizona sun during the summer? Thanks, Tom
  • We will reply to your comment shortly
    James Queck · 01/11/2020
    I had a customer who wanted me to do his pool coping along with the deck. Deck pavers are fine. Coping is turning white. How can I remove the sealer from the coping? Note: there was already white efflorescence when we started. Cleaned it. Maximum dry time allowed.
    • We will reply to your comment shortly
      The Sealer Store · 01/11/2020
      Sorry but concrete strippers will not work for a pool coping as it will get into the pool and the strippers are considered caustic.
  • We will reply to your comment shortly
    AdrianneB · 12/19/2019
    We just recently had stamped concrete installed in our back yard and are looking for a good sealer that isn't too glossy, but gives a moderate shine/wet look. I've attached a picture of the concrete to show that there isn't too much texture to the concrete. I'm wondering if the Super Seal 30 gloss would be a good product, or if another product would be suggested.
  • We will reply to your comment shortly
    Catherine Pierce · 10/31/2019
    How long should super seal 30 set before driving golf cart and car on it?
  • We will reply to your comment shortly
    JJ Johnny Jackson · 10/31/2019
    Can you apply over latex painted prick walk?
  • We will reply to your comment shortly
    Dusty · 09/28/2019
    can Super Sealer be painted
  • We will reply to your comment shortly
    Clay Smith · 09/25/2019
    When you reseal after Super Sealer has been down for 2 years, do you need to strip the old Super Sealer off, or can you reapply over the old coat. If you can do this, how many times can you reseal before having to strip? Or, do you ever have to strip?
    • We will reply to your comment shortly
      The Sealer Store · 09/25/2019
      Reapply over the old coat. You can do this at least a few times if not more.
  • We will reply to your comment shortly
    Denise Peterson · 09/12/2019
    I have a garage that I stained with water base stain. Love the look, however can't seem to find a sealer that's easy to use , can go over what I have and resistant to hot tired, water from pool traffic..
  • We will reply to your comment shortly
    Bob B · 09/03/2019
    I have pavers around my pool and lanai in SW Florida. Pavers under the roof had efflorescence on them and I used a mix of muriatic acid and water to remove. Everything looks good now. All pavers look great wet. Will the SuperSeal 30 duplicate that look? Thanks
    • We will reply to your comment shortly
      The Sealer Store · 09/03/2019
      It will enhance like a wet look and add a glossy shine as well.
  • We will reply to your comment shortly
    Mark Torcello · 08/23/2019
    I just applied Super Seal 30 on my stampeded concert patio, with a brush. It’s been about an hour after and I’m noticing little bubbles are starting to appear while drying. Is that normal? I was planning on applying a second coat after Aprox 4 hrs of driving.
    • We will reply to your comment shortly
      The Sealer Store · 08/23/2019
      Bubbles can happen to stamped concrete when applying in the sun. Bubbling of a sealer can also occur if application is done in hot weather, or if the concrete is in direct sun. In these conditions, the sealer will “skin over” and dry on the surface before all of the solvent has evaporated. The pressure of the solvent trying to evaporate will form a bubble in the sealer surface. It’s best to apply sealers during the coolest part of the day when concrete is not in direct sun.

      Best to not apply a second coat. Later in the early evening and out of the sun, you can apply xylene solvent with a sprayer to all bubbles. This will flatten them so it dries correctly.
  • We will reply to your comment shortly
    Sean · 07/22/2019
    Hello. I applied Super seal and I got some light and dark areas. Can I apply a 2nd coat to even out the apperance? Or any other suggestions? Thanks.
    • We will reply to your comment shortly
      The Sealer Store · 07/22/2019
      Please reply back with some pictures.
      • We will reply to your comment shortly
        Sean · 07/22/2019
        Hello. Here are some pictures of the light and dark areas. It might be a little hard to see because of the sun. Thanks again.
Parameters of Product: Concrete and Brick Paver Sealers
Application Method
Roller
Interior or Exterior
Exterior
Your Surface Type
Brick Pavers/Stamped/Decorative Concrete
Brands
SuperSeal Sealers
Free Shipping
Yes
Available Sizes
5 Gallon
Water or Solvent Based
Solvent Based
Enhance Look
Wet Look and Gloss