Supreme Shield SB-600 1 Gallon

2 Ratings 2 Reviews
$40.00
Pick Your States VOC Option
 Back to: Concrete Sealers

Choose SB-350 for LOW VOC Version

SUPREME SHIELD SB is a solvent-based penetrating sealer designed for stamped concrete, concrete pavers and other porous concrete surfaces. Application of SUPREME SHIELD SB will enhance the color and give the wet look without adding the gloss and plastic look associated with traditional film forming sealers. Once treated, the surface repels water and oil to prevent staining.

  • Enhances & Preserves Natural Color with a Wet Look
  • No Gloss or Shine
  • Water & Salt Resistant
  • Stain & Oil Resistant
  • Immediate Results
  • Easy To Use

PREPARATION Clean dirt, wax, grease, oil, and other contaminants from the surface. Be sure to remove any foreign coating unless the previous coating is same or similar solvent based sealer or stain. Make sure the surface is clean, dry, and sound. Clean oily concrete with Clemons’ CONCRETE CLEANER DEGREASER NEUTRALIZER or other degreasing soap. Use a bristle brush for heavily oiled spots. If the surface is not adequately porous, etch with Clemons’ ETCH & CLEAN. Rinse well with a pressure washer. Allow 24 hours to dry. Apply only when surface and air temperatures are above 50° F and below 90° F. For pavers, sweep away any loose sand.

APPLICATION Brush may be used where roller or sprayer won’t reach. Do not pour directly from can to concrete. Apply evenly from can or other metal container with an appropriate roller. If rolling, use a solvent resistant nap roller. Every few feet turn perpendicular to the first coat, and cross roll without re-dipping. The continual dipping with the first coat gives a heavy application and the cross-rolling allows for an even application. Do not allow to puddle. If spraying, use an acetone resistant pump sprayer and clean up immediately with aromatic solvent such as A-1 Solvent or Xylene. Do not thin product. Foot traffic should be avoided for 4 hours. Vehicle traffic should be avoided for 48 hours. Cooler temperatures or increased humidity will slow the dry.

NET COVERAGE RATE Two thin coats are recommended. Over application may result in a slick surface.

Textured or Stamped: 200 sq. feet per gallon

Broom Swept: 200 sq. feet per gallon

Concrete Pavers: 100 sq. feet per gallon

 

Reviews

Tuesday, 07 August 2018

Outstanding product. Does exactly as stated. Colors of my pavers are more vibrant, with no build. Wish that I could share a photo!

Larry Weader

Wednesday, 03 May 2017

The best paver sealer for adding a rich wet look, but without the gloss or shine.

The Sealer Store
Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    The Sealer Store · 04/20/2017
    mike walker:
    Is this product-Supreme Shield SB-600 Wet- a product to use on brick patio around a swimming pool??

    Concrete Brick Pavers, yes.
  • We will reply to your comment shortly
    mike walker · 04/20/2017
    Is this product-Supreme Shield SB-600 Wet- a product to use on brick patio around a swimming pool??
Parameters of Product: Concrete and Brick Paver Sealers
Application Method
Roll or Chapin 1949 Sprayer Only
Interior or Exterior
Exterior
Your Surface Type
Brick Pavers/Stamped/Decorative Concrete
Brands
SuperSeal Sealers
Free Shipping
No
Available Sizes
1 Gallon
Water or Solvent Based
Solvent Based
Enhance Look
Wet Look Only