Armstrong Clark Stain 1 Gallon

$40.99
 Back to: Armstrong-Clark Wood Stains

Free shipping on all 5 Gallon Pails!

Mahogany is the go-to choice for Exotic Hardwoods such as IPE and has shown better color retention than any other Exotic Hardwood Stain!

Armstrong-Clark Company Wood Stains

Armstrong's deck and siding wood stain has nondrying conditioning oils that separate from the drying side of the formula. These oils penetrate deep into the deck or siding wood fiber where the wood's natural oils used to be. This process rejuvenates the wood. The drying oils stay at the surface, lock in the conditioning oils and create a dry to the touch barrier. Armstrong's deck and siding wood stain formulas also contain vegetable oils, transparent oxide pigments, water repellents, mildewcide, and solvent.

Quality is what Armstrong-Clark brings to you. Backed by five generations of oil-based coatings experience, coupled with modern technology, Armstrong-Clark can meet and exceed your need for oil based wood coatings.

  • Can be applied in direct sunlight and heat of the day. If the first coat penetrates within 30 minutes a second coat can be applied for extra protection.
  • Easily applied by brush, roller, garden sprayer or airless spray equipment.
    When spraying - back-rolling or brushing will help even out appearance. If there are any puddles or glossy spots after 24 hours, remove with a dry rag.
  • Non-drying oils penetrate deep to recondition older wood.
  • Drying oils, pigments, and water repellents protect against water and UV damage and lock in the nondrying oils.
  • Complies with all government environmental standards.
  • No offensive odor.

Coverage:
Armstrong-Clark Wood Deck Stain applies at about 150-200 feet per gallon. Actual coverage varies depending on wood porosity.

Armstrong Clark Wood Stain Color Chart

Reviews

Friday, 05 May 2017

Natural looking wood stain that applies easy.

The Sealer Store
Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Liza Rivas · 06/09/2019
    I’m using Armstrong n Clark yo stain my deck, do I also need to use a sealant?
    • We will reply to your comment shortly
      The Sealer Store · 06/09/2019
      No, nor can you or need to apply a sealer over any deck stain.
  • We will reply to your comment shortly
    Bill Crager · 06/05/2019
    cost to send 1 gallon semi-trans chestnut deck oil base sealer zip 63456-1448
    • We will reply to your comment shortly
      The Sealer Store · 06/05/2019
      If you add to cart and enter your full shipping info, it will update with the shipping costs.
  • We will reply to your comment shortly
    David · 05/02/2019
    We live in Victoria British Columbia, Vancouver Island. Washington state is just south of us. Would there be a postal code/delivery address in Washington state could pick up our order to avoid brokers fees and duty charges? Canadians are allowed to bring back a certain amount of USA goods duty free after a stay of a minimum of twenty four hours.
    • We will reply to your comment shortly
      The Sealer Store · 05/03/2019
      You would have to find your own delivery address in the states, we do not supply those. Many Canadians do delivery to the states and pick up.

      There are no brokerage or duty charges from us when we deliver to Canada. Shipping costs and taxes only.
  • We will reply to your comment shortly
    Tood · 09/05/2018
    I purchased some of the semi natural oak. after 1-2 yrs will i need to strip this off my deck or can i just clean and brighten and then put the same stain over it
  • We will reply to your comment shortly
    David · 08/26/2018
    Can you ship to Mass?
  • We will reply to your comment shortly
    Cheryl Alden · 07/21/2018
    I have a PT deck with Armstrong Clark rustic brown and I love it. I just purchased a gazebo with cedar posts and want to stain those to match. However, they have water based stain from the vendor, who says you can stain on top. I don’t want to strip as there are a lot of small pieces in the roof. Do you know of a water based stain that would be close to AC’s rustic brown? I would try samples but don’t have any spots that won’t show. Thanks.
    • We will reply to your comment shortly
      The Sealer Store · 07/22/2018
      You cannot apply a different brand of stain on top of their coating. Doesn't matter if water-based or oil-based, you have to strip/remove no matter what. We offer water-based stains and none of them will work to go on top of a stain of a different brand.
  • We will reply to your comment shortly
    Gord F · 06/02/2018
    In Ontario Canada we have brown pressure treated deck boards which I want to use. I like the AC semi transparent chestnut colour. Will it show up on the new boards?
  • We will reply to your comment shortly
    Bob · 06/01/2018
    I have a mahogany deck which needs to be coated with a stain. Is your mahogany stain color neutral or is it tinted towards mahogany?
  • We will reply to your comment shortly
    Ellen · 05/29/2018
    Are solid color stains more susceptible to peeling? If I wish for a stronger or more solid grey color, will I be able to achieve it with 2 coats of the Armstrong Driftwood stain? If not, what other Armstrong clark equivalent brand would you recommend to obtain a more solid look? Thank you!
    • We will reply to your comment shortly
      The Sealer Store · 05/29/2018
      Solid color stains are prone to peeling. You cannot make the AC into a solid by adding more coats.
  • We will reply to your comment shortly
    Sean · 05/01/2018
    Hi,
    I just built a new cedar deck and I want to seal it. I also want to darken the wood a bit, make it look like it does when its wet as opposed to when it's dry. But I also want to keep the natural wood look and not lose any of the natural cedar look. What sealer/stain would you recommend.
  • We will reply to your comment shortly
    Mike · 04/26/2018
    Is there any difference in penetration ability and likelihood of future peeling between a semi transparent vs. semi solid?
  • We will reply to your comment shortly
    The Sealer Store · 07/24/2017
    Oliver A.:
    I tried a sample of chestnut semi transparent on the pressure-treated spruce decking that I am using. The second coat seemed to intensify the color and make it less transparent. Is there any draw back to using the natural tone as a second and third coat?

    You cannot use the Natural as the second coat and you cannot apply more than 2 coats "wet on wet" when staining the deck with AC.
  • We will reply to your comment shortly
    Oliver A. · 07/23/2017
    I tried a sample of chestnut semi transparent on the pressure-treated spruce decking that I am using. The second coat seemed to intensify the color and make it less transparent. Is there any draw back to using the natural tone as a second and third coat?
  • We will reply to your comment shortly
    The Sealer Store · 07/17/2017
    Oliver A.:
    I'm staining a new deck of pressure treated spruce with the semi-transparent chestnut. When I re-stain it in 2 years time, will I loose transparency? Will the color get darker? Would it be OK to use the transparent natural tone to re-coat if I still liked the color after 2 years?

    You will not lose transparency nor does it get darker as long as the prep is done correctly.
  • We will reply to your comment shortly
    Oliver A. · 07/17/2017
    I'm staining a new deck of pressure treated spruce with the semi-transparent chestnut. When I re-stain it in 2 years time, will I loose transparency? Will the color get darker? Would it be OK to use the transparent natural tone to re-coat if I still liked the color after 2 years?
  • We will reply to your comment shortly
    The Sealer Store · 05/26/2016
    That would not make it darker, but redder. A little bit of Oxford Brown would make it darker.
  • We will reply to your comment shortly
    G M Martin · 05/26/2016
    can I add some of the woodland brown to the Rustic Brown to make it darker?
  • We will reply to your comment shortly
    The Sealer Store · 03/27/2016
    Hard to say as it depends on how your store it and if you close it to the point there is no evaporation of the product. Make sure it does not freeze.
  • We will reply to your comment shortly
    john sullivan · 03/26/2016
    i need to re-stain the deck about every 2 years. if i have some armstrong clark semi solid stain left over, would it still be good to use 2 years later?
  • We will reply to your comment shortly
    The Sealer Store · 09/25/2015
    You cannot match the RB in the semi-solid colors. The oxford would be the closest.
Parameters of Product: Deck/Wood Stains
Available Sizes
1 Gallon
Brands
Armstrong Clark
Coats Needed
1-2 Coats
Free Shipping
No
Oil or Water Based
Oil Based
Stain Transparency
Semi-Transparents
Your Wood Type
All Wood Types Cedar/Redwood/PTP/Etc
Horizontal or Vertical Surfaces
Both
Low VOC State
Yes