Armstrong Clark Stain 1 Gallon

$40.99
 Back to: Armstrong-Clark Wood Stains

Free shipping on all 5 Gallon Pails!

Mahogany is the go-to choice for Exotic Hardwoods such as IPE and has shown better color retention than any other Exotic Hardwood Stain!

Armstrong-Clark Company Wood Stains

Armstrong's deck and siding wood stain has nondrying conditioning oils that separate from the drying side of the formula. These oils penetrate deep into the deck or siding wood fiber where the wood's natural oils used to be. This process rejuvenates the wood. The drying oils stay at the surface, lock in the conditioning oils and create a dry to the touch barrier. Armstrong's deck and siding wood stain formulas also contain vegetable oils, transparent oxide pigments, water repellents, mildewcide, and solvent.

Quality is what Armstrong-Clark brings to you. Backed by five generations of oil-based coatings experience, coupled with modern technology, Armstrong-Clark can meet and exceed your need for oil based wood coatings.

  • Can be applied in direct sunlight and heat of the day. If the first coat penetrates within 30 minutes a second coat can be applied for extra protection.
  • Easily applied by brush, roller, garden sprayer or airless spray equipment.
    When spraying - back-rolling or brushing will help even out appearance. If there are any puddles or glossy spots after 24 hours, remove with a dry rag.
  • Non-drying oils penetrate deep to recondition older wood.
  • Drying oils, pigments, and water repellents protect against water and UV damage and lock in the nondrying oils.
  • Complies with all government environmental standards.
  • No offensive odor.

Coverage:
Armstrong-Clark Wood Deck Stain applies at about 150-200 feet per gallon. Actual coverage varies depending on wood porosity.

Armstrong Clark Wood Stain Color Chart

Reviews

Friday, 05 May 2017

Natural looking wood stain that applies easy.

The Sealer Store
Ask a Question or Post a Picture...
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    The Sealer Store · 09/25/2015
    You cannot match the RB in the semi-solid colors. The oxford would be the closest.
  • We will reply to your comment shortly
    Dave McGlashan · 09/24/2015
    I am staining a cedar deck that has old and new wood. I am using cedar semi-transparent on the deck and rustic brown semi-transparent on the railing and trim.The rustic brown semi-transparent does not penetrate as well on new cedar wood as it does on old cedar leaving a much lighter brown. I want to try a semi-solid on the new cedar to get the darker appearance. Which semi-solid would best match the rustic brown.
  • We will reply to your comment shortly
    The Sealer Store · 05/04/2015
    On this link:

    http://www.opwdecks.com/wood-stain-samples.htm
  • We will reply to your comment shortly
    Ginette McCarthy · 05/04/2015
    Can I get samples of the Armstrong semi transparent stain?
  • We will reply to your comment shortly
    The Sealer Store · 10/01/2014
    Yes that is correct.
  • We will reply to your comment shortly
    Jacqueline Stephens · 10/01/2014
    I read comments below and they are not mine?? Our deck is "brown PYW" and we used your samples to test colours and decided on the "CEDARTONE" WOOD STAIN. I am assuming in my order above this is the "Cedar transparent" stain??
  • We will reply to your comment shortly
    The Sealer Store · 08/20/2014
    Jackie, For cedar you can use any color. The Hardwood colors are the same and not different but the Mahogany will not look like the picture online on cedar wood. That is on IPE.
  • We will reply to your comment shortly
    Jackie · 08/20/2014
    What is the difference between Armstrong Clark wood stain for decks and Armstrong Clark Hardwood / Ipe deck stain. Is the formula different? We have a cedar deck.
  • We will reply to your comment shortly
    The Sealer Store · 08/08/2014
    As long as you remove the old stains you can use the Cabot.
  • We will reply to your comment shortly
    Tony Diagonale · 08/08/2014
    I have two wood slat benches for outdoors. One is IPE coated with Cabot ATO, and the other is Oak stained many years ago which is now flaking. Can I use AC after sanding off the the other stains? Or do you recommend something else?
    Thanks,
    Tony
  • We will reply to your comment shortly
    The Sealer Store · 07/22/2014
    You will need to add to cart and enter shipping info to see charges for shipping to Canada.
  • We will reply to your comment shortly
    The Sealer Store · 09/03/2013
    I would look at the Amber color for this. Try to remove 95% or more of the old stain.
  • We will reply to your comment shortly
    Dale Marquis · 09/03/2013
    I have stripped off the old Woodguard stain which lasted for 10 yrs but unfortunately darkened over the years. Looking for something that is light and will not darken. How does this stain measure? Does the old stain have to be completely removed as I think some of the old Woodguard might still be deep in the wood. Sanded the entire house before stripping.
  • We will reply to your comment shortly
    The Sealer Store · 03/30/2012
    As long as the Behr is removed from the wood the yes!
  • We will reply to your comment shortly
    JV · 03/30/2012
    I have sanded, striped, and neutralized a deck that had several coats of Behr water based stain. Can I use this product on it now?
Parameters of Product: Deck/Wood Stains
Available Sizes
1 Gallon
Brands
Armstrong Clark
Coats Needed
1-2 Coats
Free Shipping
No
Oil or Water Based
Oil Based
Stain Transparency
Semi-Transparents
Your Wood Type
All Wood Types Cedar/Redwood/PTP/Etc
Horizontal or Vertical Surfaces
Both
Low VOC State
Yes