Penofin Green Label 1 Gallon

$46.99
 Back to: Penofin Products

 

Penofin Pressure-Treated Wood Finish

Penofin finish for pressure-treated wood is formulated for all types of pressure-treated wood.

  • One-coat application
  • 99% ultraviolet protection
  • Added mildewcides
  • Prevents peeling and cracking
  • Beautifies pressure-treated wood

    Gallon Coverage
    200-250 square feet of Pressure-Treated Wood Finish.

    Product Performance
    Expect 3-5 years on vertical surfaces, 1-2 years on horizontal surfaces depending on use and weather exposure.
Penofin Blue Colors

 

 

Parameters of Product: Deck/Wood Stains
Available Sizes
1 Gallon
Brands
Penofin
Coats Needed
1 Coat
Free Shipping
No
Oil or Water Based
Oil Based
Stain Transparency
Semi-Transparents
Your Wood Type
Pressure Treated Pine Only
Horizontal or Vertical Surfaces
Both
Low VOC State
Yes

Add comment


Security code
Refresh

Comments   

re: sealant/stain for treated wood
You should let the new wood dry and weather for a few months then prep with a deck cleaner and a wood brightener. This will allow the stain to soak into the wood better. I would look at Armstrong Clark stain for this.
Quote
sealant/stain for treated wood
What do you recommend for treating a new covered boathouse made of pressure treated pine. Which onw will hold up the best?
Penofin Green Label or Messmers UV Plus or if you recommend something better. It will be used primarily on the floor and vertical posts.
Quote